Aluminum Trim

72" Aluminum Trim
with LED Ambient Lighting

$113.00 PER KIT

Includes one strip of aluminum 72" long and TWO LED strips that are 36" long.
LED strips have wires on both ends, so they can
be cut into four separate pieces if necessary.

WARM WHITE LEDs are now available. These have a light output similar to an incandescent light bulb.

NOTE: LED manufacturers often make improvements & changes to their LEDs. The LED strips you receive, may look different than those on this page. We test all LED strips we receive, to insure they will work properly.

COOL WHITE	WARM WHITE	BLUE	RED	GREEN










Click above to order our Ambient LED Aluminum Trim with WHITE LED lights.	Click above to order our Ambient LED Aluminum Trim with WARM WHITE LED lights.	Click above to order our Ambient LED Aluminum Trim with BLUE LED lights.	Click above to order our Ambient LED Aluminum Trim with RED LED lights.	Click above to order our Ambient LED Aluminum Trim with GREEN LED lights.

	We now have drilling fixtures for our trim! Our trim is easy to bend, cut, shape, and polish. When it comes to drilling the blind holes, on the backside of the trim, for mounting it onto your custom panels, this drilling fixture makes that task easy as well. Click below for more info:	Drilling Fixture for Aluminum Trim with LED Ambient Lighting $45.00
	3/4" Blunt Tipped Screws 20 Screws - $3.00	1/2" Blunt Tipped Screws 20 Screws - $3.00
	3/8" Blunt Tipped Screws 20 Screws - $3.00	1/4" Blunt Tipped Screws 20 Screws - $3.00
We also offer screws that can be used to fasten our trim to your panel. These screws are blunt tipped. They do not have a pointed tip like a standard sheet metal screw. This allows more threads on the screw to "bite" into the aluminum and reduces the risk of dimpling the trim from a pointed screw. To use these screws, you need to drill blind holes into the backside of the trim using a 3/32" drill bit. These screws will "bite" into the aluminum, and the trim does not need to be tapped. You only need 1/8" to 1/4" of the screw protruding inside the trim, so measure the thickness of your panel, and use the chart below to find the screw size needed. Do not overtighten the screws, they just need to be snug. We sell them in packs of twenty screws. If you want us to drill the trim, please email us. Buying the screws does not include the cost of Krist Kustoms drilling the trim. Note: These blunt tipped screws aren't a common fastener, so sometimes they are hard for us to locate a supplier that has them in stock. Because of this, you may receive stainless steel screws, zinc screws, or black oxide screws.


	Four colors of LED lights are available. • WHITE • BLUE • RED • GREEN • WARM WHITE *NEW COLOR!
	Our LED lighted aluminum trim is sold in a "raw" finish. It is very easy to bend, shape the ends, and polish. The LED lights are available in WHITE, RED, BLUE, or GREEN. Watch for instructional videos soon.
	Our LED lighted aluminum trim matches our standard aluminum trim, and the LED lights are completely hidden when installed with the LEDs facing down.
	Want us to do SOME of the hard work for you? You can order our trim raw, but with holes drilled on the backside for easier mounting. We supply screws to fasten the trim to panels 1/8 to 3/16 thick. You will receive a piece of 72" raw trim (unpolished), with holes drilled every 4" on the backside of the trim. All cut and/or bent, drilled, polished trim is a non-refundable custom item. 72" Pre-Drilled LED Aluminum Trim *WE ARE CURRENTLY NOT OFFERING OUR TRIM PRE-DRILLED. We have drilling fixtures available that help you drill nicely centered holes. We drill our trim per order, so please allow AT LEAST 2-4 weeks for us to prepare your trim for you. Pre-drilled trim is NON refundable. If you can't wait, our undrilled RAW trim is in stock and ships immediately. All cut and/or bent, drilled, polished trim is a non-refundable custom item.
	Looking up from the bottom, you can see the thin LED strip tucked under the lip of the aluminum trim.
	The aluminum trim can be easily bent and shaped.

	Our LED lighted aluminum trim is sold as a do-it-yourself kit. We recommend bending, shaping, and polishing the aluminum trim to the desired shape first. After you have the desired shape of the trim, clean the groove with alcohol, then install the peel-n-stick LED light strip. As noted below, the LED light strips can be cut to length. In the future, we may sell our trim in pre-cut and pre-polished lengths...

	Watch this short video on our LED lighted aluminum trim